Contact

CUSTOM MOULDS AND PACKAGING FOR YOUR NEEDS

Single dose.Many possibilities.

We produce custom moulds to create single-dose packaging in your desired shape. Dimensions, cavities, filling and print are developed around your project.

Explore packagingHow it works
Honey, face cream and tomato sauce
Fold-to-open card packagingFold. Squeeze. Apply.

Fold to open. Squeeze to use.

See the fold-to-open card in three simple steps.

Fold the card along its central opening line.
01Fold

Fold the card along its central opening line.

Press the flexible surface to dispense the contents.
02Squeeze

Press the flexible surface to dispense the contents.

Direct the product onto the area where it will be used.
03Apply

Direct the product onto the area where it will be used.

How does a simple fold open the pack?

Folding opens the intended line in the semi-rigid base. Pressure on the flexible film then dispenses the product through this opening.

Fold-to-open cardScroll to view

A semi-rigid base and a product reservoir form a single-use card pack.

Packaging designed around the experience.

How a product opens, travels and dispenses is part of your brand experience.

01

A simpler opening

Fold the card to open it and apply the product without scissors or a separate cap.

02

Portioned presentation

Present your product in individual doses defined around its intended use.

03

Made to go with you

Create compact packs for travel, hospitality and everyday care sets.

04

A surface for your brand

Bring packaging shape and print together with your product’s visual identity.

01 / PACKAGING STRUCTURES

The right packaging for your product.

Cards, cups or ampoules: we design the shape, dimensions and cavity layout around your requirements and produce a custom mould for manufacture.

01

Fold-to-open card packs

Single-dose card packs that dispense the product through a central opening line.

  • Pack dimensions
  • Fill quantity
  • Print design
Honey, face cream and tomato sauce
02

Thermoformed cups

Custom-moulded single or multi-compartment cups sealed with lidding film.

  • Mould and cavity structure
  • Lidding film
  • Fill quantity
Ketchup portion
03

Break-tip ampoule packs

Film-formed packs for liquid products, with a narrow neck and an integral break-off tip.

  • Body and neck geometry
  • Fill quantity
  • Film and print
Olive oil and balsamic vinegar

Where does your product belong?

At the table, on a trip or in a care routine. Let’s build the packaging around that moment.

Olive oil and balsamic vinegar

Food

A portion, ready to use.

Make sauces, oils and spreads part of the serving and takeaway experience.

  • Restaurant and hospitality service
  • Takeaway and travel
  • Honey, sauces, oils and purées
Explore applications
Fragrance and care samples

Cosmetics

An easier way to try your product.

Present creams, serums and fragrances in single-dose samples, or create daily and sequential care sets.

  • Sampling and product launches
  • Travel and hotel amenity kits
  • Serums, creams and fragrances
Explore applications
02 / DAILY CARE

7-day application

Weekly care collections

Seven individual doses form a care programme from Monday to Sunday. Each unit is identified by its day and product print.

  1. 01Monday
  2. 02Tuesday
  3. 03Wednesday
  4. 04Thursday
  5. 05Friday
  6. 06Saturday
  7. 07Sunday
03 / CARE ROUTINE

6-step care

Sequential care applications

Six steps, from cleansing to makeup preparation, are arranged from top to bottom in their order of use. Two columns provide two applications of the same programme.

Application sequence

  1. 01

    Cleanse

    Prepare for care with cleansing gel.

  2. 02

    Tone

    Apply toner after cleansing.

  3. 03

    Serum

    A separate dose of skin serum.

  4. 04

    Eye care

    A dedicated cavity for eye cream.

  5. 05

    Moisturize

    Apply moisturizing cream.

  6. 06

    Prime

    Finish with makeup primer.

Contact
04 / APPLICATION COLLECTION

Example applications. Custom production.

The products shown are examples, not a fixed selection. With custom mould production, we design the shape, dimensions and cavity layout around your requirements.

34 applications

Break-tip ampoule

Weekly skin and hair care

Two seven-day collections for skin serum and hair serum. Each unit is marked in order from Monday to Sunday.

Fold-to-open card

Honey, face cream and tomato sauce

Fold the card along its centre line, then squeeze the chamber. Honey, face cream or tomato sauce dispenses through the central opening.

Break-tip ampoule

Fragrance and care samples

Three fragrance alternatives alongside face serum, hair serum and care oil in single-use sample packs.

Multi-compartment pack

Six-step skincare set

Cleanse, tone, serum, eye care, moisturize and prime. Each of the two print alternatives has two columns and six rows.

Break-tip ampoule

Olive oil and balsamic vinegar

Olive oil and balsamic vinegar in transparent reservoirs that reveal the contents. Each three-unit strip contains individual portions with narrow necks and integrated tips.

Thermoformed cup

Masks, cream and cleansing gel

Face mask, hair mask, face cream and cleansing gel share the same cavity structure. Opaque printed surfaces are combined with clear bodies that reveal the fill.

Thermoformed cup

Mango and avocado purée

Mango and avocado purée presented in single-portion packs, with the fill contained in a moulded cavity.

Thermoformed cup

Eye-care patches

A broad-format pack for eye-care patches, shown from the printed sealing face and the formed reverse.

Multi-compartment pack

Ketchup and mayonnaise

Ketchup and mayonnaise in two separate cavities on one pack. The central sealed area keeps the fills separate.

Multi-compartment pack

Four-sauce portion tray

Four wells in one opaque tray for tomato sauce, mayonnaise, mustard and pesto. One shared foil lid opens the pack; front and underside views.

Thermoformed cup

Sheet mask

A pack with a broad sealing perimeter for a sheet mask. The printed face completes the single-use presentation.

Thermoformed cup

Ketchup portion

A single-cavity portion pack for ketchup, with product information on the printed lidding film.

Thermoformed cup

Skincare cream

Skincare cream in a custom-formed cavity. The print area and the cavity share one integrated pack.

Thermoformed cup

Honey portion

A custom-moulded single-cavity pack for honey, presented as a portion with a film lid.

Multi-compartment pack

Cleanse and moisturize set

Cleanser and moisturizer in two separate cavities on one pack, combining two care steps in one set.

Thermoformed cup

Mustard portion

A single-portion mustard pack. An edge extension provides a grip for the lidding film.

Thermoformed cup

Clay mask portion

A shallow single-cavity application for a clay mask, completed by the printed sealing face.

Thermoformed cup

Skincare cream portion

A custom-moulded pack for skincare cream. The same cavity structure is also shown with honey as an alternative fill.

Thermoformed cup

Tomato sauce

Tomato sauce in an opaque red shell-shaped cup, shown open from above and from its moulded underside.

Thermoformed cup

Face cream

Face cream in an opaque pearl-white shell-shaped cup, shown open from above and from its moulded underside.

Thermoformed cup

Pesto

Pesto in a clear leaf-shaped cup, shown open from above and through its transparent moulded underside.

Thermoformed cup

Face cream

Face cream in an opaque forest-green leaf-shaped cup, shown open from above and from its moulded underside.

Thermoformed cup

BBQ sauce

BBQ sauce in an opaque charcoal star-shaped cup, shown open from above and from its moulded underside.

Thermoformed cup

Face cream

Face cream in an opaque dusty-rose star-shaped cup, shown open from above and from its moulded underside.

Thermoformed cup

Mustard

Mustard in an opaque yellow hexagonal cup, shown open from above and from the same pack’s moulded underside.

Thermoformed cup

Face cream

Face cream in a clear hexagonal cup, shown open from above and through its transparent moulded underside.

Thermoformed cup

Honey

A custom-moulded pack with a film lid for single-portion presentations.

Thermoformed cup

Clay mask

A custom-moulded pack with a film lid for single-portion presentations.

Thermoformed cup

Strawberry jam

A custom-moulded pack with a film lid for single-portion presentations.

Thermoformed cup

Cleansing gel

A custom-moulded pack with a film lid for single-portion presentations.

Thermoformed cup

Mustard sauce

A custom-moulded pack with a film lid for single-portion presentations.

Thermoformed cup

Skincare cream

A custom-moulded pack with a film lid for single-portion presentations.

Thermoformed cup

Chocolate spread

A custom-moulded pack with a film lid for single-portion presentations.

Thermoformed cup

Hair mask

A custom-moulded pack with a film lid for single-portion presentations.

Contact

Production

Inside the production line

Explore the film path, dosing head and processing stations through original photographs and video clips.

Packaging line with a metal enclosure and transparent protective panels in a production area
Production line overview
Multiple dosing nozzles and supply tubes positioned above open packaging cavities

Dosing head

The dosing nozzles sit above the open cavities in the formed film.

The line in operation

Film movement and dosing head00:18
Formed film moving along the line00:07
Processing stations along the line00:07
Production line details4 photographs
Film with ampoule-shaped cavities passing beneath a guide roller
Formed film and guide roller
Close view of dosing nozzles aligned with cavities in the film
Dosing nozzles in detail
Metal guides and a processing mechanism along the film path
Film processing station
Packaging web with printed lidding film passing through the line mechanisms
Lidding film and the film path

From your product to a filled pack.

Tell us about your product and how it will be used. We will assess the packaging format, fill quantity and print together.

  1. 01

    Product assessment

    Product properties, intended use, target fill quantity and order requirements are assessed.

  2. 02

    Custom mould and sample

    A custom mould is produced for the required shape, dimensions and cavity layout, followed by a sample.

  3. 03

    Filling and print preparation

    Filling conditions and print design are prepared according to product and packaging compatibility.

  4. 04

    Production planning

    Production, inspection and dispatch are planned around the approved sample and technical scope.

Snappax

Contact

Contact us about our packaging and filling services.

[email protected]+90 531 962 80 55

Your details are used only to respond to your message.

Necessary

Always active

Stores your language and cookie choices. Always active for these site functions.

Storage and control

Your choice is shared across this site’s language versions and stored for 180 days. The language preference is stored for one year. Analytics cookies are configured for up to 180 days; Google determines advertising cookie lifetimes.

When you withdraw permission, we clear the relevant first-party measurement cookies this site can access. The page may reload to stop tools already loaded. You can manage cookies belonging to other sites in your browser settings.

Measurement events do not include your name, email address, phone number or form message. Opening your email application is not counted as a submitted project enquiry.

Cookie enquiries: [email protected]